Cisco CCNA Prüfungskurs in New York
<Cisco Certified Network Associate>
Konfigurieren
Sie IP-Adressen und Subnetzmasken auf Routern und Hosts. Konfigurieren
Sie Routing-Protokolle.
Führen Sie auf einem Switch eine Erstkonfigurierung durch und konfigurieren
Sie Switches mit VLAN.
Implementieren Sie Access Listen auf Routern und suchen Sie Fehler. Suchen
Sie VLAN- und Routing-Protokollfehler.
Finden Sie WAN Fehler. Beschreiben Sie STP. Bewerten Sie die TCP/IP-Kommunikation
und die dazugehörigen Protokolle.
Bewerten Sie Regeln der Paketsteuerung Benutzen Sie das OSI-Modell als
Leitfaden bei der Netzwerk-Fehlersuche.
Entwerfen Sie ein Internetwork mit der Cisco-Technologie
Lerninhalte in englischer Sprache
Configure IP addresses, subnet mask on routers and hosts. Configure
routing protocols.
Perform initial configuration on a switch and configure swiches with
VLAN.
Implement and troubleshoot Access Lists on routers. Perform VLAN and
routing protocol troubleshooting. Perform WAN troubleshooting. Describe
STP. Evaluate TCP/IP communication and its associated protocols. Evaluate
rules of packet control. Utilize the OSI model as a guide for network
troublshooting. Design an internetwork using Cisco technology.
- The student will learn to describe the functions of various network devices.
- Select correct components to meet proper network specification.
- Use the OSI and TCP/IP models to explain how data flows in a network.
- Describe the impact of applications ( Voice Over IP and Video Over IP) on a network.
- Determine the path between two hosts across the network.
- Differential between LAN and WAN operations.
- Select appropriate media, cable and connectors to connect switches to other network devices and hosts.
- Perform and verify initial switch configuration tasks including remote access management.
- Verify network status and switch operation using basic utilities like ping, traceroute, telnet, SSH, arp, ipconfig, Show and debug commands.
- Identify describe and resolve common switched network media issues, configuration issues, auto negotiation and switch hardware failures.
- Describe enhanced switching technologies including but not limited to VTP, VLAN, PVSTP and 802.1q.
- Configure verify and troubleshoot VTP and inter-VLAN routing.
- Implement basic switch security including port security, trunk access, management, VLAN other than VLAN1.
- Describe the operation and benefits of using private and public IP addressing.
- Explain the operation and benefits of using DHCP and DNS.
- Configure, verify and troubleshoot DHCP, DNS operation on a router.
- Implement static and dynamic addressing services for hosts in a LAN environment.
- Calculate and apply an addressing scheme using VLSM IP addressing design to a network.
- Describe IPv6 addresses.
- Identify and correct problems associated with IP addressing and host configurations.
- Describe basic routing concepts including packet forwarding, router lookup process.
- Describe operation of routers including router boot-up, POST and router components.
- Configure, verify and troubleshoot RIPv2.
- Configure, verify and troubleshoot OSPF.
- Configure, verify and troubleshoot EIGRP
- Verify router hardware and software operations using SHOW and DEBUG commands.
- Implement basic router security.
- Describe the standards associated with wireless media including IEEE WI-FI alliance, ITU/FCC.
- Identify and describe the purpose of the components in a small wireless network using SSID, BSS, ESS.
- Identify the basic parameters to configure on a wireless network to ensure that devices connect to the correct access point.
- Compare and contrast wireless security features and capabilities of WPA including open, WEP, WPA-1 and WPA-2.
- Identify common issues with implementing wireless networks including interface, miss configurations.
- Describe today’s increasing network security.
- Explain the need to implement a comprehensive security policy to minimize the threats.
- Describe the functions of common security appliances and applications.
- Describe recommended security practices including initial steps to secure network devices.
- Describe the purpose and types of ACL.
- Configure and apply ACL based on network filtering requirements including CLI/SDM.
- Configure and apply ACL to limit telnet and SSH access to the router.
- Verify and monitor ACL in a network environment.
- Troubleshoot ACL issues.
- Explain the basic operation of NAT.
- Configure NAT for the given network requirements.
- Troubleshoot NAT issues.
- Describe different methods for connecting to a WAN.
- Configure and verify a basic WAN serial connection.
- Configure and verify Frame Relay on Cisco Routers.
- Describe VPN technology including importance, benefits, role, impact, components.
- Configure and verify a PPP connection between routers.
Studiengebühren
Teilzeitunterricht: Hier
finden Sie den Zeitplan- ► Schnelles und effektives Lernen
- ► Wochenenden nutzen
- ► Bezahlbar
| Wochen | Stunden | Einschreibegebühr | Bücher | Klassenunterricht | Gesamt |
|---|---|---|---|---|---|
| 4 | 28 | 30US$ | 50US$ | 600US$ | 680US$ |
- Vollzeitunterricht : Hier
finden Sie den Zeitplan
- ► Detailorientierter, noch effektiverer Unterricht
- ► 18 intensive Wochenstunden
- ► Mehr praktische Projekte
- ► Wochendendlabor steht zur
Verfügung
- ► Einstufungstests
| Wochen | Stunden | Einschreibegebühr | Bücher | Klassenunterricht | Gesamt |
|---|---|---|---|---|---|
| 5 | 88 | 100US$ | 50US$ | 1,040US$ | 1,190US$ |
Stundenplan
- ► Vollzeitunterricht mit 18 Wochenstunden, jeweils von Montag bis Freitag, 5 Tage / Woche
- Vormittag: Montag bis Donnerstag von 10:00 bis 13:30 Uhr und Freitag von 10:00 bis 14:00 Uhr
- Nachmittag: Montag bis Donnerstag von 14:00 bis 17:30 Uhr und Freitag von 14:00 bis 18:00 Uhr
- ► Teilzeitunterricht mit 7 Wochenstunden
- Samstag: 10:00 bis 17:00 Uhr
Akzeptierte Zahlungsmethoden
- ► Kreditkarte – Visa
/ Master / American Express
- ► Schecks – Barschecks / Reiseschecks / Zahlungsanweisungen
- ► Andere - Barzahlung / Überweisung / Google Onlinezahlung
Formulare 
Sie möchten mehr Informationen?
Kein Problem – setzen Sie sich einfach mit uns in Verbindung. 
